Getting Started with ConnectedFresh: A Guide to Setting up Your Gateway and Sensors
3 Basic Steps
- Unpack your boxes
- Activate equipment
- View data in real time
We're here for you! If you have any questions or are having trouble, you can reach out to
support@connectedfresh.com to set up some time to connect live (link).
Unpack your boxes
If this is your first package from ConnectedFresh, it's likely that you received sensors and at least one gateway. All hardware is pre-configured and ready to go.
Sensors will be labeled with an identifier (i.e. CFX-NY-MEV-001). This ID will be helpful for assigning sensors, moving sensors, or contacting ConnectedFresh Support.
Activate Equipment
Please follow the appropriate guide for activating your equipment:
- Temperature
- Leak Detection
- Tracker Sensors
- Door Open/Close
View data in real time
Activating your account
You should have received an email with an activation link. If you cannot find the email or the link has expired, please reach out to ConnectedFresh Support.
Dashboard Demo
Once your sensors are set up and ready to go, you will be ready to get your dashboard up and running! Please follow the
link here for an overview on the key features to best use your dashboard.
Item Categories
Related Articles
Getting Started with Your ConnectedFresh Dashboard: A Guide to Navigating Your New System
Welcome to ConnectedFresh! This article will provide you with an overview of the different resources, tools, functions, and capabilities you may find useful as you use your dashboard. For more specific information into any piece of the dashboard, ...
Accessing Manual Backup Temperature Logs
Below you will find instructions on how to download a manual back-up temperature log. Accessing Manual Temperature Logs Please follow the link here to download a manual temperature log. Within the log, you will find a standardized document to input ...